ListenpunktProduct Overview
ListenpunktCoating AdditivesListenpunktSpecial Coating ProductsListenpunktStickie TreatmentListenpunktAdditives for the Wet End
ListenpunktCoating / Rheology
ListenpunktGeneralListenpunktUse of Acroflex
ListenpunktStickie Treatment
ListenpunktGeneralListenpunktModulare Treatment Concept
ListenpunktPassivation with PCAListenpunktTreatment of the StockListenpunktMachine Clothing Treatment
ListenpunktWire SectionListenpunktPress SectionListenpunktDrying Fabric Treatment

Polyspers for the Wire Section

While using Polyspers, forming fabrics and their guide rolls are cleaned continuously and maintained free of contaminants.

  • Polyspers is applied through the existing shower of the forming fabric. Ideally a shower well ahead of the high pressure shower is chosen to deliver sufficient residence time.
  • Depending upon the contamination level, the dosage of Polyspers is chosen between 2 and 20 ml per minute per m wire width.
  • If the forming fabric is heavily soiled a preliminary wire cleaning is recommended.