ListenpunktProduct Overview
ListenpunktCoating AdditivesListenpunktSpecial Coating ProductsListenpunktStickie TreatmentListenpunktAdditives for the Wet End
ListenpunktCoating / Rheology
ListenpunktGeneralListenpunktUse of Acroflex
ListenpunktStickie Treatment
ListenpunktGeneralListenpunktModulare Treatment Concept
ListenpunktPassivation with PCAListenpunktTreatment of the StockListenpunktMachine Clothing Treatment
ListenpunktWire SectionListenpunktPress SectionListenpunktDrying Fabric Treatment

Hydrospers for the Press Section

Using Hydrospers, press felts and guide rolls are continuously cleaned and remain free of soiling.

  • Hydrospers is added by means of low or high pressure showers.
  • To obtain best results, it is recommended to treat two felts so that each side contacts a felt. Thus, sticky deposits in the dryer section are significantly reduced as a side effect. Additionally, then can be reduced further by treating the drying fabrics with Polyprevent.
  • Depending upon the contamination, the dosage rate is roughly 5 to 20 ml per minute per m wire width.